Packaging Tool Suppliers

Shanghai We Pack Co., Ltd. manufactures and supplies the Packaging Tool range that completes our cargo securing and transport protection portfolio — the strapping machines, tensioners, safety cutters and strap-handling equipment that turn strap, buckles and edge protection into a secured load. Founded in 2019 as a subsidiary of Shanghai Dreammao Packaging Technology Co., Ltd., we operate a 10,000 m² facility with 120 employees, dedicated R&D, testing and quality control teams, and 9 production lines. Tools, strap and protective consumables are planned as one system, so our Packaging Tool manufacturer operation in Shanghai is organised around application matching rather than one-off tool sales.

The range covers seven working families: electric strapping machines, pneumatic strapping machines, manual fiber strap tensioners, long-handled unpacking scissors, automatic strapping machines, automatic carton sealers and PP/PET strap dispensers. Each family is positioned against a specific combination of strap type, load weight, throughput and working environment.

Seven Working Families in the Packaging Tool Range

• Electric Strapping Machine — cordless battery platforms for strapping at the pallet, inside the container or on the dock, where cable and air lines are impractical.
• Pneumatic Strapping Machine — compressed-air tools for continuous production lines and heavy-duty bundling, with no battery changeover.
• Manual Fiber Strap Tensioner — hand-operated tensioning for polyester fiber and composite strap where volumes are low or power is unavailable.
• Long-handled Unpacking Scissor — extended-reach cutters that keep hands clear of tensioned strap and wrapped loads.
• Automatic Strapping Machine — conveyor-integrated strapping with photo-eye sensing for cartons, books and stacked products.
• Automatic Carton Sealer — top-and-bottom case sealing with adjustable tape heads for mixed carton sizes.
• PP/PET Strap Dispenser — coil handling and payout equipment that keeps strap feeding smoothly at the workstation.

Matching the Tool to the Strap, the Load and the Line

Tool selection follows from the strap decision, not the other way round. PP strap behaves differently from PET under tension, and a tool sized for a light carton will not hold a settled bundle of steel or timber. We map the working point first — strap material, load behaviour, cycle count — and then the tool body that fits it.

Electric Strapping Machines: Cordless Platforms for Mobile Work

Battery-powered tools perform tensioning, sealing and strap cutting in one cycle, which is what makes them practical for operators moving between pallets, stillages and container doors. Our electric platforms cover the Q1 all-in-one tool, the V1 with manual tension control, the V2 economical platform, the V3 brushless high-efficiency tool, the DD19A/25A high-pull model, and the compact JD13/16 and portable JDC13/16 bodies.

• Q1 All-in-One Battery Powered Strapping Tool — single-cycle tension, seal and cut for high-volume mobile strapping.
• V1 Manual Tension Battery Powered Strapping Tool — the operator controls tension build-up, useful where load compressibility varies.
• V2 Economical Battery Powered Strapping Tool — cost-focused platform for routine carton and bundle work.
• V3 Brushless High-Efficiency Battery Powered Strapping Tool — brushless drive for longer runtime between charges.
• DD19A/25A High-Pull Battery Powered Strapping Tool — higher pull force for dense, heavy or settled loads.
• JD13/16 Compact and JDC13/16 Portable Battery Powered Strapping Tools — narrow-access and low-clearance positions.

Battery platform choice shapes the whole shift pattern: charge cycles, spare battery count and the number of tools per workstation all follow from the tool body and strap width. We confirm strap width, coil size and joint type before recommending a platform.

Pneumatic Strapping Machines for Continuous Lines

Compressed-air tools are the standard answer where the line runs continuously and air is already available. The XQD19/25 and AQD19/25 handle standard PP and PET strap; the A19/25 wide-strap body suits wider strap and larger contact areas; the B19/25 extended body reaches into deep or obstructed bundles; the CA19/25 narrow-strap body works in tight positions. With no battery to swap, pneumatic tools hold a steady cycle time across a full shift — the deciding factor on high-duty packing lines.

Manual Tensioners, Safety Cutters and Strap Handling

Not every strapping point justifies a powered tool. The XW20/25/32/50 Manual Polyester Fiber Belt Tensioner covers fiber and composite strap in several widths, and the H400 Industrial-Grade Long-Handle Unpacking Scissors give the reach needed to open strapped or wrapped loads without putting hands into the tension line. PP/PET strap dispensers complete the workstation: coil payout, trolley mobility and controlled feed reduce strap twist and the small stoppages that accumulate over a shift.

Automatic Strapping and Carton Sealing on Conveyor Lines

Where the packing line already moves cartons on a conveyor, automation takes over. The MH-101A Automatic Strapping Machine straps books and cartons with photo-eye sensing, so the cycle triggers on the product rather than on an operator's foot switch. The MH-FJ-1AWE Automatic Carton Sealer applies tape to top and bottom with adjustable heads, letting one machine run mixed carton sizes without a changeover stop. Both are specified around the conveyor interface — pass height, line speed, carton size range and sealing station position.

Engineering Value: Joint Consistency, Strap Yield, Operator Safety

• Joint consistency — a repeatable tension-and-seal cycle produces the same joint on the first carton and the four-hundredth, while manual tensioning drifts as the shift goes on.
• Strap yield — correct tensioning avoids over-tensioning, which wastes strap and crushes cartons, and under-tensioning, which lets loads shift in transit.
• Operator safety — long-handled cutters, guarded sealing mechanisms and balanced tool weight reduce the hand and wrist exposure that comes with high-volume strapping.
• System fit — tools are matched to the Packing Strap, buckles and edge protection supplied with them, so the securing system is evaluated as a whole rather than as separate parts.

Quality Approach and Compliance Evidence

Tools pass through the same staged control as our consumables: incoming material checks, in-process inspection at forming and assembly, and functional verification before packing. Our quality system is supported by an in-house laboratory, testing equipment and third-party institutions such as SGS and TUV, and is certified to ISO 9001. Products comply with AAR, SGS, TUV and other international transport test standards, with EN 1492-1 applying to our lashing range. Test reports can be issued with shipments where a project requires documented evidence.

OEM/ODM Customization and Integration Support

OEM/ODM work on packaging tools covers tool configuration, strap width and joint type, marking and packaging, and the sensing and control options on automatic units. Our engineering team develops from drawings or samples, and the minimum order quantity starts at 100 pieces — practical for a trial run and stable for repeat programmes. For packaging equipment agents and system integrators, we supply consumables matched to strapping machines, wrapping equipment and automated packaging lines, and we support joint development of equipment, consumables and service as one package.

Information We Use to Configure Your Solution

A workable configuration comes out of a short, specific set of project inputs. These are the details we work from:

• Strap type and width — PP, PET, polyester fiber or composite — and coil size
• Load type, weight range and surface: cartons, bundles, coils, timber, machinery
• Joint method — seal, buckle or clip — and whether buckles are supplied with the strap
• Throughput per shift and the number of strapping points per load
• Power and air availability at the workstation, plus battery logistics for cordless tools
• Carton or product size range and pass height for conveyor-fed machines
• Line speed, conveyor interface and sealing station position for automatic units
• Environment: dust, moisture, temperature, washdown, outdoor or container work
• Operator ergonomics — tool weight, reach, working height and shift length
• Documentation needs: test reports, marking, labelling and packing format
• Annual volume and target budget, so the platform and spare-parts plan match the project

We return a configuration with the tool platform, strap specification, buckle or seal type, accessory list and a packaging solution plan. Where the project also covers void filling or edge protection, the same proposal carries the Dunnage Bag and corner protector specification alongside the tools.

Frequently Asked Questions

Which strapping tool suits an operation running both PP and PET strap?

Our electric and pneumatic platforms are built for PP and PET strap, so the same tool body can serve both materials. The deciding variables are strap width, joint type and the pull force the load needs. We confirm these against the actual carton or bundle before recommending a model, and where a line runs both materials at different stations we usually specify separate tools so tension settings stay fixed.

Can tools be supplied together with strap, buckles and protective packaging?

Yes. Packaging Tool sits inside the same portfolio as packing strap, strapping buckles, dunnage bags and paper corner protectors, so a project can be quoted as one securing system. Matching the tool to the strap and buckle supplied with it removes the compatibility problems that appear when the three are bought separately.

What do you need to quote an automatic strapping or carton sealing line?

Carton or product size range, line speed, conveyor pass height, sealing station position, tape or strap specification, and the control interface expected by the line. Photos or a layout sketch of the packing area shorten the process considerably. We then confirm the machine configuration, the consumable specification and the installation scope.

Do you support OEM/ODM customization on packaging tools?

Yes. We support OEM/ODM customization covering tool configuration, strap width and joint type, marking and packaging, and the sensing and control options on automatic units. Our engineering team works from drawings or samples, and the minimum order quantity starts at 100 pieces.

How is tool quality verified before shipment?

Tools follow the same staged control as our other products: incoming material checks, in-process inspection during forming and assembly, and functional verification before packing. Our own laboratory and testing equipment are backed by third-party institutions such as SGS and TUV, and the management system is certified to ISO 9001. Test reports can accompany shipments where a project requires them.

Where are your packaging tools exported?

Our products are exported to North America, South America, Europe, Asia and the Middle East. Production runs from our Shanghai facility, which keeps export handling and consolidated shipments of tools, strap and protective packaging efficient for projects that combine several product families.