Electric Strapping Machine Manufacturers

Shanghai We Pack Co., Ltd. builds and supplies battery-powered electric strapping machines for plants that strap cartons, bundles, coils and palletised loads every shift. As a subsidiary of Shanghai Dreammao Packaging Technology Co., Ltd., we manufacture the tool together with the strap and buckles that surround it, so a strapping station arrives as one matched system instead of three separate purchases.

Seven battery-powered models cover the range, from an all-in-one unit that tensions, seals and cuts in a single cycle to compact and high-pull tools for restricted access or heavy loads. Each tool is configured around the strap material, the load and the throughput of the application it will serve.

Where Battery Strapping Tools Fit

Hand-held battery tools replaced manual tensioners and pneumatic strappers on most dispatch floors because they remove the air line, the loose strap tail and the inconsistent pull of a hand tool. A single trigger cycle tensions the strap, welds the joint by friction and cuts the tail, which keeps joint quality independent of how strong the operator is at the end of a shift.

Typical duty points are end-of-line carton closing, bundle consolidation before palletising, coil and profile wrapping, and re-strapping at the loading dock. The same tool family also serves field and yard work where no compressed air or mains power is available.

• End-of-line cartons: one or two straps per carton, high repetition, short cycle time.
• Bundles and profiles: aluminium extrusions, tubes, timber, printed stacks, brick and block.
• Coils and heavy units: high-tension PET strap where joint strength matters more than cycle speed.
• Pallet and container loading: re-strapping after inspection, mixed loads and irregular shapes.

The Electric Strapping Machine Range

Our Electric Strapping Machine range is organised by duty rather than by price alone, so a tool can be matched to the load before the quotation is written.

How a Strapping Cycle Runs on the Floor

The operator feeds strap around the package, threads it into the tool and closes the trigger. Tension is applied to the set value, the friction-weld jaw melts and fuses the two strap layers under pressure, and the cutter releases the tail. Cycle time, joint strength and cut quality are the three outputs that decide whether a tool suits a line.

Joint strength depends on the strap material, strap thickness and the weld pressure the tool applies, so tool and strap are always specified together. PP strap is the economical choice for cartons and light bundles; PET strap carries higher retained tension and is the normal choice for coils, metal and dense loads.

Access, weight and operator handling

Tool weight and body height matter as much as pulling force on a bench where several hundred straps are applied per shift. Compact models reduce reach problems on pallet corners; portable models keep the working position flexible where the load cannot be brought to a fixed station.

Matching the Tool to the Load and the Strap

• Cartons and light bundles: automatic all-in-one or economical models with PP strap; cycle time is the main variable.
• Dense bundles, profiles and timber: high-pull tool with PET strap to hold tension after settling.
• Coils and metal units: high-pull tool, PET strap, and buckles or edge protection where the strap contacts a sharp corner.
• Restricted access: compact body with a short nose so the strap path can be closed inside a recess.
• Mobile or yard work: portable tool with spare battery and carry case.

Strap, buckles and edge protection are supplied from the same production base, which keeps the joint behaviour predictable across a shipment. Our Packing Strap range covers PP, PET, composite and woven options, and the PET Packing Strap line is the usual partner for high-tension work.

Critical Specifications We Confirm Before Quotation

• Strap material and grade: PP, PET or composite, and whether the strap is embossed or smooth.
• Strap width and thickness: the tool must accept the strap the customer already buys or intends to standardise on.
• Required tension: set by the load, the settling behaviour of the package and the transport mode.
• Seal method: friction-weld for PP and PET, or a buckle where the application calls for a mechanical joint.
• Package geometry: minimum and maximum circumference, corner radius and the clearance available around the strap path.
• Throughput: straps per shift and the number of tools needed to cover peaks without waiting on charging.
• Battery and charging routine: number of batteries per tool, charger type and the power supply available at the station.
• Environment: dust, moisture, temperature range and whether the tool is used indoors or at the dock.

Configuration Options and OEM / ODM Builds

Tools are configured around the working point rather than sold as a single fixed variant. We support OEM and ODM work covering tool branding, kit contents, charger plug and voltage for the destination market, battery count, carry case, and the spare-part set shipped with each unit.

For distributors and equipment integrators, the tool can be packed as a complete strapping kit with strap, buckles and a consumable starter quantity, so the end user receives one article number for the whole station. Printing and label content are agreed at the design stage.

Quality Assurance and Acceptance Testing

Production runs under an ISO 9001 management system, with in-house laboratory checks and third-party verification through SGS and TUV where a project requires it. Our wider cargo securing portfolio is tested against AAR, SGS and TUV transport standards, and the same discipline is applied to tool assembly and final inspection.

Acceptance for a strapping tool project normally covers tension repeatability across a sample of cycles, joint strength after welding, cut quality and tail length, battery endurance over a simulated shift, and a visual and functional check of every unit before packing. Test reports and inspection records are issued with the shipment when the project calls for them.

Information We Use to Configure Your Solution

Spare Parts, Documentation and Delivery Scope

Wearing parts are the weld jaw, cutter blade, battery and charger, and these are supplied as service kits so a tool can be kept in rotation without returning it to the factory. Each shipment includes an operating manual, a spare-part list and a packing list; training material and application notes are provided for distributor teams and end-user operators.

Tools ship in individual cartons with foam protection, consolidated onto export pallets or into a full container load depending on quantity. Our operations centre sits close to Shanghai Port, which keeps consolidated shipments of tools, strap and buckles moving on one set of documents. The wider Packaging Tool programme covers pneumatic strappers, tensioners, carton sealers and strap dispensers for lines that combine several closing methods.

Frequently Asked Questions

Which strap materials can the battery-powered tools run?

Our tools are set up for PP and PET strap, with the jaw and tension setting matched to the strap width and thickness. High-pull models are normally paired with PET for coils, metal and dense bundles, while PP covers cartons and lighter bundles.

Which model suits a high-volume carton line?

The Q1 all-in-one tool is the usual choice because tensioning, sealing and cutting complete in one trigger cycle. Where the line runs multiple shifts and tool uptime is critical, the V3 brushless model is specified instead.

Can the tools carry our brand and our packaging?

Yes. We support OEM and ODM builds covering tool branding, carton artwork, kit contents, charger plug and voltage for the destination market. Minimum order quantity starts at 100 pieces, and printing is agreed before production.

How is tension consistency verified before shipment?

Sample cycles are run in our in-house laboratory to check tension repeatability, weld joint strength and cut quality, and third-party reports from SGS or TUV can be arranged for projects that require them. Every unit receives a functional check before packing.

Do you also supply the strap, buckles and edge protection?

Yes. Strap, buckles and corner protection come from the same production base, which keeps joint behaviour consistent across a shipment and lets a strapping station be ordered as one package.

What do you need from us to prepare a quotation?

Load type and unit weight, strap specification, package size and access clearance, straps per shift, number of stations, destination market and any branding requirement. With those details we can propose the tool model, battery and charger count, consumables and packing configuration.