smwlkj.net
PP WOVEN DUNNAGE BAG
Brand: MM
Material: Out Bag PP woven, Inner Bag Polymide(PA)
Structure: Out Bag(PP woven)+Inner Bag (7 layers co-extrusion PA film)+Air valve
G.W: Out Bag 70-218 g/mf, Inner Bag 75-150 g/mf
Thickness: Inner Bag 7.5S-15S/75um-150um
Compressive Strength: 20Kpa-80Kpa/5T-40T
Inner Bag Heat Seal Strength:≥35N/15MM
Inner Bag Longitudinal Tensile Strength:≥26Mpa
Inner Bag Lateral Tensile Force:≥26Mpa
Outer Bag Meridional Tensile Force:z628N/CM
Outer Bag Weft Tensile Strength:z 568N/CM
HIGH EL ASTICITY AND
SOFTNESS
High elasticity, high softness can relieve impact force
9 layers co-extruded nylon membrane with a high-strength PE film bonded toa PA
(nylon film) through two adhesive layers.
Improve the air tightness of the air bag, the effect is unparalleled.
TURBO VALVES
MM inflatable dunnage air bags equipped with a patented valve,
which allows fast inflation, when connect with the quick inflator, the
time for inflation can be reduced significantly beside ensuring
consistent pressure.
MORE CONVENIENT TO REUSE
HIGH EL ASTICITY AND
SOFTNESS
Storm-type rotary quick inflation system
Effectively enhances inflation
Make reuse easier
HOW TO INFLATE A BAG
1.Disclose the cover of the valve
2.Align the muzzle with the valve mouth
3.Press the airgun vertically until it locked on the valve
4.Push the switch upward.
5.Hold the airgun start to inflate the bag.
6.Pull out the airgun when the air pressure in the bag is enough
SCENES TO BE USED
Choosing the right type of inflatable bag, designing a reasonable filling scheme, and operating in the right way are the three most critical factors for achieving zero cargo damage.
DEMONSTRATION
RECOMMENDED PRODUCTS